Walker S14 Steering Handles Adjustment, Neutral Position Adjustment, Maintenance Instructions

Maintenance Instructions

ADJUSTMENTS

Step 2 - Steering Handles Adjustment

1.An adjustment range of approximately 3 in. (76.2 mm) is available on the steering handles - the handles­ can be adjusted forward or aft depending on the arm length of the operator. The handles can be adjusted by loosening the locknut at the pivot point and the locknut holding the handle in position in the adjustment slide. Adjust the han­dles into the most comfortable position and tighten both locknuts.

Adjustment	Locknut
Slide	(Position)

Locknut

(Pivot Point)

Steering Handles Adjustment

Step 3 - Neutral Position Adjustment

1.With the Forward Speed Control (FSC) in NEU­ TRAL-PARK,the lever should be straight up. Adjust by loosening the jam nuts on the FSC Rod and turn the rod to attain the straight up position. Tighten the jam nuts.

Correct FSC Lever NEUTRAL-PARK Position

Adjust Length of

Rod to Position

FSC Lever

FSC Lever Position Adjustment

69