Operating Instructions

Pull Steering

Levers With

Left Hand

Forward Speed Control

(FSC)

Keep Feet on Footrest

When Moving

Correct Operator Hand Position

on the Controls

3.Reverse direction of the mower by pulling both levers backward.

NOTE: Smooth action on the steering levers will produce smooth mower operation. Remem­ ber to keep the engine and ground speed slow until learning the control response.

WARNING

When moving forward, DO NOT suddenly put the tractor in reverse by rapidly pulling on the steering levers, especially when go- ing downhill, as this can lift the tractor tail wheel off the ground and set up a bucking motion due to operator overcontrol. If bucking does occur, immediately stop the bucking action by pulling the Forward Speed Control (FSC) lever into the NEU- TRAL-PARK position.

4.The FSC may be adjusted forward for faster ground speed and backward for slower ground speed. When mowing, ground speed should be adjusted to match the load on the cutter blades, i.e., as the engine pulls down in heavy cutting, pull back on the FSC lever to reduce ground speed. Adjusting ground speed helps maintain a balance between engine power and blade speed for high-quality cutting action.

5.Stop ground travel by pulling both steering le­ vers backward to the NEUTRAL-PARKposition (tractor­ not moving) and then moving the FSC lever to the NEUTRAL-PARKposition.

NOTE: If the tractor creeps forward or back­ ward with the FSC lever in the NEUTRAL-PARKposition, the transmission control needs to be adjusted. Refer to ADJUSTMENTS for Step 3 - Neutral Position Adjustment in the Maintenance

Instructions.

ENGAGING THE BLADE DRIVE

1.Set the engine throttle at about 1/2 speed. DO

NOT attempt to engage the blade clutch at high engine speeds. This will drastically short­ en drive belt life. Use only moderate engine speed when engaging the blade clutch.

2.Push the blade clutch lever SLOWLY forward to engage­ the mower blades.

CAUTION

An operator presence switch (seat switch) will cause the engine to stop if the blade clutch is engaged and the operator is not in the seat. The function of this switch should be checked by the operator­ raising off the seat and engaging the blade clutch; the en- gine should stop. If the switch is not work- ing, it should be repaired or replaced be- fore operating the mower. DO NOT disconnect the safety switches; they are for the operator’s protection.

IMPORTANT: DO NOT engage the blade clutch when transporting the mower across drives, side­ walks, loose materials, etc. DO NOT engage the blade clutch with the PTO shaft disconnected (the mower deck removed from tractor).

32

Page 35 Page 37
Page 36
Image 36
Walker S14 manual Correct Operator Hand Position On the Controls, Engaging the Blade Drive
Page 35 Page 37

S14 specifications

The Walker S14 is an innovative piece of technology designed to enhance mobility and independence for individuals facing mobility challenges. This advanced mobility device integrates cutting-edge features and technologies to deliver a safe and comfortable user experience.

One of the standout characteristics of the Walker S14 is its lightweight yet robust design. Constructed from high-quality materials, the walker provides durability without sacrificing portability. It can easily be maneuvered both indoors and outdoors, making it suitable for various environments.

A significant technological advancement in the Walker S14 is its adjustable height feature. Users can customize the walker to their preferred height, ensuring optimal support and reducing strain on the body. This feature is particularly beneficial for individuals with varying mobility needs, as it promotes a proper walking posture.

Safety is a top priority in the design of the Walker S14. It is equipped with a reliable braking system that enhances stability when stationary. The walker features ergonomic hand grips that provide comfort and reduce the risk of slipping. Additionally, its non-slip wheels are designed to provide a reliable grip on various surfaces, contributing to a safer walking experience.

In terms of storage and convenience, the Walker S14 includes a built-in storage pouch, allowing users to carry personal items or essential belongings. This feature is particularly useful for users who wish to maintain their independence while being able to access their belongings easily.

The Walker S14 is also praised for its sleek and modern aesthetic. With a variety of color options, users can choose a design that reflects their personality while still benefiting from the practicality of the mobility device.

Moreover, the Walker S14 is designed for easy folding and portability. Whether for storage or transport, users can quickly collapse the walker to fit it in tight spaces or vehicles without any hassle.

Overall, the Walker S14 combines innovative technology, user-centric design, and robust safety features to provide an unparalleled walking experience. It empowers individuals with mobility challenges to navigate their surroundings with confidence, fostering independence and a better quality of life.
Top Page Image Contents