Walker S14 manual 7 8 Location: LH Fender Part Number, 4 5 Location: RH Fender Part Number

Safety Instructions

SAFETY, CONTROL, AND INSTRUCTION DECALS

Safety, Control, and Instruction Decals are installed on the machine;

if any are missing, illegible, or damaged, a replacement should be ordered and installed before putting the machine into operation. The Decal Part Number is listed below and in the Parts Manual.

	1.
2.
3.

4. <15°

5. 6.

7.

8.

Location: LH Fender

Part Number: 8600-27

1.Throttle

2.Warning – read Operator’s Manual before oper- ating the machine.

3.Warning – wear eye and ear protection when op- erating the machine.

4.Warning – roll-over hazard.

•Do not operate on slopes greater than 15 degrees.

5.Warning – thrown object hazard.

•Keep bystanders away from the machine when operating.

6.Choke

7.Warning – entanglement hazard.

•Keep all guards in place while engine is run- ning.

8.Parking brake

•Move lever forward to engage Parking

Brake; back to disengage.

1.

2.

1. 2. 3.

4.

5.

Location: RH Fender

Part Number: 8600-26

1.Warning – do not operate the machine without a deck or other implement attached.

2.Forward Speed Control

•Move lever forward to increase speed; back to stop.

3.Warning – read Operator’s Manual before servic- ing or performing maintenance.

•Engage parking brake.

•Remove ignition key.

4.Warning – do not engage PTO clutch with PTO shaft disconnected.

5.PTO Clutch Lever

•Move lever forward to engage PTO clutch; back to disengage.

17