Walker S14 manual Hourmeter, Operating Instructions

Operating Instructions

Hourmeter

The hourmeter, which is located on the right front of the body, displays operating time accumulated while the PTO (blade drive) clutch is engaged.

The hourmeter provides maintenance reminders af- ter certain hours of operation. The hourmeter screen will start flashing the reminder one hour prior to the recommended interval and will continue until one hour after the recommended interval (two hours). The hourmeter does not have a manual reset function.

Procedure	Interval*	Reminder
Oil Change		C
	4-6 Hours	H	OIL
(Break-In)**
		G
Lubricate			LUBE
and Check	24-26 Hours
Levels
Oil Change	49-51 Hours***	C	OIL
		H
		G

*These intervals reflect the actual time that the reminder will flash (one hour prior to and one hour after the recommended interval).

**This reminder is only used one time.

***In normal operating conditions, oil changes in

100-hour intervals are acceptable. Walker and the engine manufacturers recommend engine oil changes every 50 hours in extremely dirty or dusty conditions or for units with less than 100 hours annual use.

NOTE: The blinking hour glass on the display means that the meter is operating properly.

Hourmeter

28