function saves your changes from RAM to flash memory and then reboot the system.

PPPoE / PPPoA Mode

Select this option if your ISP requires you to use a PPPoE / PPPoA connection. This option is typically used for DSL service. Please enter the proper information in the fields.

1.Open the WEB page at “WAN Æ WAN Interface”.

2.Select the Channel Mode to “PPPoE”. Set the value of VPI / VCI and select the Encapsulation mode from your ISP.

3.Enter the User Name / Password from your ISP.

4.Select the PPP connection type: Continuous, Connect on demand and Manual. If you select “Connect on demand” type, specify how many minutes the connection may be idle before it disconnects. If you select “Manual” type, use “Connect” and ”Disconnect” buttons to start / stop PPP connection.

5.Click “Add” button to add this channel. You can use the “Modify” and “Delete” button to manage your PVC.

6.Go to “Admin Æ Commit/Reboot” menu, clink “Commit and Reboot” button. The device will reboot and apply this setting.

Your ISP should provide the above information. Note that you must enter the user name exactly as your ISP assigned it. If the assigned name is in the form of user@domain where domain identifies a service name, enter it exactly as given.

26