To activate RIP for the device, select the “Enabled” radio button for RIP Mode and click “Apply Changes” to apply it.
To configure an individual interface, select the Interface, Receive Mode and Send mode. Click the “Add” button to save the configuration, and to start or stop RIP based on the Global RIP mode selected.
3.5.4.2 Static Route
This page is used to configure the routing information. Here you can add / delete IP routes.
Click “Enable” to enable the Static Routing function, you can query the preset static routes, delete an existing static route, or add a new static route. By default, the system has no
39