3.5.7 Port Mapping

Port Mapping supports multiple ports to PVC and bridging groups. Each group will perform as an independent network. To support this feature, you must create mapping groups with appropriate LAN and WAN interfaces using the “->”button. The “<- “button will remove the grouping and add the ungrouped interfaces to the Default group.

To manipulate a mapping group:

1. Select a group from the table.

2. Select interfaces from the WAN and LAN interface list and add them to the grouped interface list using the arrow buttons to manipulate the required mapping of the ports.

3. Click "Apply Changes" button to save the changes.

"Note

1. An interface only belongs to one group.

2.Please Commit/Reboot if you want to make this settings effective immediately.

43