Click “Enable” to enable UPnP function and select the WAN Interface. Click “Apply Changes” to apply your setting.

"Note

Please Commit/Reboot if you want to make this settings effective

 

immediately

 

 

3.5.8.3 Bridge

This page is used to configure the bridge parameters. Here you can change the settings or view some information on the bridge and its attached ports.

Aging Time: Enter the time for the bridge.

802.1d Spanning Tree: You can Enable or Disable the 802.1d Spanning Tree Protocol. Click “Apply Changes” to apply your setting.

"Note

Please Commit/Reboot if you want to make this settings effective

 

immediately.

 

 

 

45