Planet Technology ADE-4120 2.3 The Rear Ports, 2.4 Cabling, PWR, Port, ADSL, Reset, (RJ-45, Meaning, CONSOLE, LAN 1 —, connector), Chapter 2 Using ADE-4120

Chapter 2 Using ADE-4120

2.3 The Rear Ports

	ADE-4120
Port	Meaning
ADSL	Connect the supplied RJ-11 cable to this port
	when connecting to the ADSL/telephone
	network.
CONSOLE	Connect a RS-232 cable to this port when
	connecting to a PC’s RS-232 port (9-pin serial
	port).
LAN 1 — 4	Connect an UTP Ethernet cable to one of the
(RJ-45
	four LAN ports when connecting to a PC or an
connector)
	office/home network of 10Mbps or 100Mbps.
Reset	After the device is powered on, press it to reset
	the device or restore to factory default settings.
	The operation is as below:
	0-4 seconds: reset the device
	5 seconds or above: restore to factory default
	settings (this is used when you can not login to
	the router, e.g. forgot the password)
PWR	Connect the supplied power adapter to this
	jack.

2.4 Cabling

The most common problem is bad cabling or ADSL line. Make sure that all connected devices are turned on. On the front of the product is a bank of LEDs. As a first check, verify that the LAN Link and ADSL line LEDs are lit. If they are not, verify that you are using the proper cables.

5