￿3.4.2 Admin Setting

Go to Maintenance-> Administration to set a new user©s name and password to restrict management access to the router.

The default is admin (User's name) and admin (Password)

New Password: Type the new password in this field.

Confirm Password: Type the new password again in this field.

Note: If you ever forget the password to log in, you may press the RESET button up to 6 second to restore the factory default settings. The Factory Default Settings for User Name & Password are admin & admin.

￿3.4.3 Firmware

Go to Maintenance -> Firmware to upgrade the firmware.

You can upgrade the firmware of the router in this page. Make sure the firmware you want to use is on the local hard drive of the computer. Click on Browse to browse the local had drive and locate the firmware to be used for the update. Then press UPGRADE to upload new Firmware.

It might take several minutes, don’t power off it during upgrading. Device will restart after the upgrade!!

After a success upload, the system automatically restarts. Please wait for the device to finish restarting. This should take about 2 minutes or more. You need to log in again if you want to access the device.

22