Planet Technology ADW-4401A/Bv2 LED, PWR, LAN, LAN, WLAN, ADSL, ADSL, State, POWER, POWER, (1-4), Reset, Button, Button, Connector, Connector, Rear Panel, Description, Description

Front Panel LED definition

LED	State	Description
PWR	ON	When the router is powered on and in ready state
	OFF	When the router is powered off.
WLAN	Flashing	When wireless AP is ready
	ON	Successful connection between ADSL modem and telecom©s
ADSL		network
	Flashing	Modem is trying to establish a connection to telecom’s network
	ON	Link
LAN	Flashing	TX or RX activity
		No Link
1-4	OFF	These four LAN (Local Area Network) ports are where you will
		connect networked devices, such as PCs, print servers remote hard
		drives, and anything else you want to put on your network

Rear PanelRear panel Port and Button Definition

Connector		Description
POWER	Power connector with 12V AC 1.0 A
POWER		The power button is for turn on or turns off the router.
Button

ADSL The RJ-11 connector allows data communication between the modem and Connector the ADSL network through a twisted-pair phone wire

Router is successfully connected to a device through the corresponding LAN (1-4)port (1, 2, 3, or 4). If the LED is flashing, the Router is actively sending or

receiving data over that port.

Reset The reset button, the router restore the default settings when press this Button button until reboot

9