Planet Technology EV-401M Introduction To Ethernet over Vdsl Converter, General Description

1.2Introduction To Ethernet over VDSL Converter

	General Description
	The converter is a switching architecture with four RJ45
	10/100Mbps Fast Ethernet switching ports and one
	10Mbps RJ11 symmetric Ethernet over VDSL port
	(symmetry means 10Mbps upstream and 10Mbps
	downstream data rate). it is ideal for signal conversion by
	transmitting the Ethernet data from the standard twisted
	pair cable to the telephone cable and extending the
	distance.
	The Ethernet over VDSL combines the well proven
	Ethernet and VDSL technology to transmit the Ethernet
	format data by using VDSL signaling over the most
	widespread telephone wires and has no impact to current
	voice service. Therefore, it is very good for Internet building
	phone line network because every room or house could
	use the existing phone line to transmit data to the Internet
	and the whole building could share the Internet line to the
	wide area network with minimum cost.
	With much enough bandwidth, the 10Mbps symmetric
	capability enables many multi-media services on local
	Internet come true, like VOD (Video On Demand), Internet
	caching server, distance education, … and so on.
	In one community or hotel, we just need to install one local
	server then the multi-media services will be localized that
	is people do not need to access the services through
	Internet but using local area network with better bandwidth
	and efficiency. Meanwhile, this kind of infrastructure will
	minimize the burden on the Internet.
	The converter is plug-n-play without any software to
	configure and also fully compliant with all kinds of network
	protocols. Moreover, the rich diagnostic LEDs on the
	front-panel provide the operating status of individual port
	and the whole system. There are two models of the
	converters, one is used for client side and the other is
6	PLANET Ethernet over VDSL series