Planet Technology EV-401S, EV-401M user manual Multi-Port Master

central side. If you want to setup one pair of converters for point-to-point connection then one set must be client mode and the other one is master mode.

The cable specifications of the connection are listed as following:

10BASE-T, Category 3, 4 or 5 UTP 100BASE-TX, Category 5 UTP

Ethernet over VDSL, Twisted-pair telephone wires

The two drawings listed below are typical application for the Ethernet over VDSL converter.

Drawing 1: LAN to LAN connection

Drawing 2: Multi-port Master Connection

Multi-Port Master

Note: Slave device must connect to Master device through the telephone wire. Slave cannot connect to Slave and Master cannot connect to Master. EV-401M works as Master device and EV-401S works as Slave device.

EV-401M / EV-401S User's Manual 7