LED indicators
| SYSTEM LED |
| |
| PWR | Steady | This indicator lights green when the converter |
|
| Green | is receiving power. |
|
| Off | Not receiving power |
| VDSL LED |
|
|
| Link | Steady | If both ends of the VDSL devices are |
|
| Green | connected then the LED will blink for a while (in |
|
|
| 10 seconds), this is the stage of speed |
|
|
| |
|
|
| the Link LED will stay green. |
|
| Blink | The link process is fail. |
|
| Green |
|
| ACT | Blinking | If there is any traffic transverses the port then |
|
| Green | the LED will blink green. |
|
| Off | No traffic on the network. |
| Fast Ethernet | LED |
|
| 100M/10M | Steady | The 100M LED indicates the link speed of |
|
| Green | each port. If the LED light green then the |
|
|
| connection speed is 100Mbps |
|
| Off | Link speed is 10Mbps |
| Link /Act | Steady | Every port has a Link/Activity LED. Steady |
|
| Green | green (link state) indicated that the port has |
|
|
| good linkage to its associated device. |
|
| Blinking | The port is receiving or transmitting data |
|
| Green | from/to its associated partner. |
|
| Off | 1. The connected device’s power are off |
|
|
| 2. The port’s cable is not firmly seated in its |
|
|
| connectors in the switch and in the |
|
|
| associated device. |
|
|
| 3. The connecting cable is not good or is not |
|
|
| with correct type |
|
|
| 4. The connecting device, including any |
|
|
| network adapter is not functional. |
| FDX/ COL | Steady | The port works on Full Duplex mode |
|
| Amber |
|
|
| Off | The port works on Half Duplex mode |
|
|
|
|
12 |
| PLANET Ethernet over VDSL series | |
