Planet Technology FSD-1601 ST, FSD-1600 Connect to 100Base-FX Switch/Device Model FSD-801/1601

Figure 3-1 10/100Mbps File server to Switch Connection

3.3.2 Connect to 100Base-FX Switch/Device (Model: FSD-801/1601)

Plug the pair the fiber-cable to the Switch’s fiber-optic port, secure the fiber-optic connector. Connect to other end to the fiber-optic port of the device like repeater hub, switch or workstations.

Be noted for the duplex mode. For Hub, only Half-Duplex mode can be selected, at the mean time, the cable distance cannot exceed 412 meters. For Switch or end-node that works on full-duplex mode, the maximum distance cannot exceed 2 kilometers.

The pair of the connectors must be crossed, ie. TX/RX port of the Switch should connect to RX/TX Port of the device in other end.

Consult your local dealer for more information about fiber-optic wires, connector type or network distances.

Figure 3-2 Fiber-cable Switch to Switch Connection

12