PLANET Technology Corp.

GRT-101/401/402 User’s Manual

Download

 

Byte Transferred :

624641 bytes

Complete

 

Transfer Complete, Replace Now? (y/n): y

Writing flash.......................

OK!

Do you want to reboot? (y/n): y

Be sure to write the new image to NVRAM and immediately reboot the device to activate it. When you log back onto GRT series after the reboot, then you can use the “show system” command to verify the version of the new firmware that is active, and restore your configuration.

Note: All configurations will be cleared during the upgrading procedure. Make sure that you have a backup configuration file before you start the upgrading procedure. See section 3.17.1 Backup configuration for details.

-71-