PLANET Technology Corp.

GRT-101/401/402 User’s Manual

interfaces have on-line help information. To get on-line help, type “?” for CLI mode or press CTRL+Q for menu driven

interface.

3.4.1 Multi-level password protection

When you login via serial console or Telnet, GRT series defaults to a program execution (read-only) privileges to you. To change the configuration and write changes to nonvolatile RAM (NVRAM), you must work in enable mode. Follow the steps below to invoke the enable mode:

admin> enable Supervisor password: ****

Note: The supervisor password is the same as that for web management interface. If you have not change password setting for the web interface of GRT series, enter “root” to enter GRT series. For more security issues for remote management interfaces such as Telnet and web interface, see section 3.15 Management Security.

You are now in enable mode. The system prompt appears:

admin#

Follow the steps below to change the user interface:

To select menu driven interface for user profile 1 (default user profile), enter:

admin# admin user modify 1 attrib menu

The following command select CLI mode for user profile 1:

admin# admin user modify 1 attrib command

To save your changes enter:

admin# write

To enable your changes, reboot the system:

admin# reboot

For the menu interface, there is a method to enable CLI mode temporarily for script input. By pressing CTRL+U simultaneously, you can see the CLI system prompt in the command line window:

Command Line Window...

admin#

Press CTRL+U again in the command line window to back to the menu driven

-35-