PLANET Technology Corp.

GRT-101/401/402 User’s Manual

3.8 Setup

All of the setup parameters are located in the subdirectories of setup. Move the cursor “ >> “ to setup and press enter.

>> mode

Switch system operation mode

shdsl

Configure SHDSL parameters

wan

Configure WAN interface profile

bridge

Configure transparent bridging

route

Configure routing parameters

lan

Configure LAN interface profile

ip_share

Configure NAT/PAT parameters

dhcp

Configure DHCP parameters

dns_proxy

Configure DNS proxy parameters

hostname

Configure local host name

default

Restore factory default setting

3.8.1 Mode

The product can act as routing mode or bridging mode. The default setting is routing mode. You can change the system operation mode by using mode command. Move the cursor “ >> “ to mode and press enter.

---------------------------------------------------------------------

Command: setup mode <RouteBridge>

Message: Please input the following information.

System operation mode (TAB select) <Route>: Route

---------------------------------------------------------------------

3.8.2 SHDSL

You can setup the SHDSL parameters by the command shdsl. Move the cursor “ >> “ to shdsl and press enter.

>> mode

Configure SHDSL mode

link (GRT-402 only) Configure SHDSL link

n*64

Configure SHDSL data rate

type

Configure SHDSL annex type

clear

Clear current CRC error count

margin

Configure SHDSL SNR margin

There are two types of SHDSL mode, STU-R and STU-C. STU-R means the terminal of central office and STU-C customer premises equipment. GRT-402’s link type will be 2-wire or 4-wire mode according to the product.

-45-