Physical Details

 

ICA-500 Rear Panel

 

 

Rear Panel

 

LAN port

Use a standard LAN cable to connect your ICA-500 to a

 

10/100BaseT hub or switch.

Alarm I/O

ICA-500 provides a terminal block with 8 pins of connectors

Connector

located on the center of the back panel. There are 3 pins for

 

two alarm inputs and 5 pins are for alarm output. The I/O

 

connectors are physical interface to sense and/or activate

 

alarm signals to a variety of external sensors or alarms.

MIC

Built-in microphone for audio recording. The audio recording

 

feature can be disabled in the web configuration.

Reset Button The RESET button is used for

•Restore Default IP Address, Administrator ID, and Administrator password.

•IP address: 192.168.0.20

•Administrator ID: admin

•Administrator Password: null (no password)

Reset steps:

•Power off the Network Camera.

•Insert the paper clip or other tool and press and hold the button down continuously.

•Power on the Network Camera again.

•Wait at least 8 seconds and release the tool. Then the Network Camera has been restored to default settings.

Note:

Restoring the factory default configurations will lose the existing machine settings. User needs to access machine default IP address or use the IP Finder program to search the Network Camera for configuration and operations..

3