2.Set the mounting base onto the wall or ceiling and center it over the mounting hole, using the supplied four retaining screws to secure the main body.

3.Set the proper image by moving the IP camera body and set the focus by turning the lens to the left or right direction.

4.When the IP camera focus adjustment has been completed, use the provided L-wrench to fasten the tamper-resistant housing to the main body.

5.Vari-Focal operation guide:

Once the picture appears on the monitor, open the cover and adjust the lens wrench to “NEARÁËFAR”, get the view zoom that you desire, and then adjust the focus wrench of the lens to obtain the best picture. After adjustment, tighten both wrenches.

 

Zoom Adjustment

NEAR

TELE

Focal Adjustment

 

FAR

WIDE

21