1.If no IP address is assigned within 30 seconds, the networked device will automatically assign 192.168.0.20. User may now open your web browser, and key in http://192.168.0.20 in the address bar of you web browser to logon IP Camera’s web config-
uration page.
2. Power Line Frequency
Note - If you found the video image is flash, you may need to choose 50 or 60 Hz frequency (depends on different country).
-World wide power line frequency table is inside user’s manual, Appendix.
After connected to networked device, the device will prompt for User name and Password. For the first time, please enter: admin as username and no password to continue Web Management.
If difficulty is met, please refer to the following steps to establish the connection:
- The networked device must be installed and powered ON.
If the networked device’s default IP Address (192.168.0.20) is already used by another device, the other device must be turned OFF until the device is allocated a new IP Address during configuration.
34