In the LAN socket, there are two LEDs embedded:

LAN LED (green color)

This LED will be flashing while network accessing via Ethernet.

Power LED (orange color)

This LED is used to indicate whether DC power is on or not. In addition, this LED will be flashing while the network accessing of the IVS-H120.

3.DI/DO/RS-485 Connector

This IVS-H120 provides a general I/O terminal block with one digital input and one output for device control. It has 6 Pins that from left to right that are 5V DC power supply (50mA maximum), Alarm Input, GND, Alarm Output, D+ terminal of RS-485 and D- terminal of RS-485.

Note

The RS-485 of IVS-H120 is master that can control external scanner or PTZ camera.

Right-hand side Panel1.Reset Button

This button is hidden in the pinhole. Please refer to the Appendix A in manual for more information.

2.MIC-in Jack

MIC-in (line level) jack allows any device that could input audio.

3.A/V Out Jack

After connect with the A/V cable attached in packaging, it not only allows this device to output audio or alerting sound, but also it provides composite video output. User can use A/V cable to connect the video server with a TV monitor or VCR.

30