Incoming call attendant

Registrar Server Port

Port number of SIP Register Server. Assigns a value from 1024 to 65535, the common default SIP port is 5060.

Outbound Proxy server’s IP address / Domain name. Assign a Outbound Proxy Address server’s IP / Domain name which is in charge of call-out

Outbound Proxy Port

service.

Port number of Outbound Proxy Server. Assign a number from 1024 to 65535, the common default SIP port setting is 5060.

When the service provider registered to PBX, incoming calls

On duty / Off duty voice will hear On / Off duty voice, default settings are “Enable”.

select(For how to record On/Off duty voice please refer “Record Voice Menu”).

Choose a pre-set hunt groups, default is “blank”. There are 3 types of combination setup.

1.If On duty/ Off duty voice is “Enabled”, after caller hear the voice menu one time, the call will be transferred to the pre-defined group for call attendant.

2.If On duty/ Off duty voice is “Disabled”, caller will not

hear the voice menu, the call will be directly transferred to the pre-defined group for call attendant.

3.If On duty/Off duty voice is “Enabled” and no group is pre-defined, voice menu will repeat itself until incoming caller respond to it.

(For how to make hunt group please refer “Hunt Group Setting”)

Table 3-9. Service provider advance setup description

Trunk Management – FXO Trunk

FXO (Foreign Exchange Office) Trunk Setting, can be Connected to PBX or CO line with RJ-11 analog line. FXO port can be connected to the extension port of a PBX or directly connected to a PSTN line of carrier

Figure 3-10. FXO Trunk setting

22