Chapter 2 Hardware Installation

Before you proceed with the installation, it is necessary that you have enough information about the WAP-1963A.

2.1Hardware Connection

12V DC

 

 

+

LAN

RESET ANT

 

1.Locate an optimum location for the WAP-1963A. The best place for your WAP-1963A is usually at the center of your wireless network, with line of sight to all of your mobile stations.

2.Assemble the antennas to WAP-1963A.Try to place them to a position that can best cover your wireless network. The antenna’s position will enhance the receiving sensitivity.

3.Connect RJ-45 cable to WAP-1963A.Connect this WAP-1963A to your LAN switch/hub or a single PC.

4.Plug in power adapter and connect to power source. After power on, WAP-1963A will start to work.

Note: ONLY use the power adapter supplied with the WAP-1963A. Otherwise, the product may be damaged.

If you want to reset your WAP-1963A to default settings, press the Reset button 5 second. And then wait for 10 seconds for WAP-1963A restart.

3