Planet Technology WAP-4030A 3.1.5Point-to-MultipointMode

3.1.5Point-to-Multipoint Mode

This function provides to bridge more than 2 wired Ethernet networks together by wireless connection. You can use more than two WAP-4030A with “P2MP mode” to connect those wired Ethernet networks together.

Parameter	Description
AP MAC Address	If you want to bridge more than two wired Ethernet networks together with wireless
	connection, you have to enter the MAC addresses of otherWAP-4030As that with
	join the bridging work into the fields.
Mode	802.11b mode: It allows to select the transmit rate up to 11Mbps
	802.11g mode: It allows to select the transmit rate up to 54Mbps
	Mixed mode: It provides best performance for 11g transmission when you enable
	the AP mode selection to “Mixed mode”.
Channel	Select the appropriate channel from the list provided to correspond with your
	network settings.
Security	Disable: Disable the security function.
	WEP: WEP is an authentication algorithm, which protects authorized Wireless LAN
	users against eavesdropping. When this function enable, please make sure you
	have set all the WAP-4030As to the same WEP key. You may refer to section 3.5 to
	set the WEP key.
Advance setting	It provides more powerful features for you to configuring. Please refer to section
	22