Chapter 2 Hardware Installation
Before you proceed with the installation, it is necessary that you have enough information about the
WAP-4030A.
2.1Hardware Connection
1.Locate an optimum location for the WAP-4030A. The best place for your WAP-4030A is usually at the center of your wireless network, with line of sight to all of your mobile stations.
2.Assemble the antenna to WAP-4030A.Try to place them to a position that can best cover your wireless network. The antenna’s position will enhance the receiving sensitivity.
3.Connect RJ-45 cable to WAP-4030A.Connect this WAP-4030A to your LAN switch/hub or a single PC.
4.Plug in power adapter and connect to power source. After power on, WAP-4030A will start to work.
Note: ONLY use the power adapter supplied with the WAP-4030A. Otherwise, the product may be damaged.
If you want to reset your WAP-4030A to default settings, press the Reset button 5 second. Then release the button and wait for 10 seconds for rebooting.
