Planet Technology WAP-4030A 3.2Status, 3.3Admin

3.1.4.1 to configure.

Please click “Apply” button to save the above configurations.

In this option, you can see the WAP-4030A current settings.

When it is work in AP mode, you can press the “Station List” button to know which client is connected to this AP like below.

You can upgrade WAP-4030A with latest firmware and assign a new password in this screen.

Contents

Page Copyright Federal Communication Commission Interference Statement FCC Caution Federal Communication Commission (FCC) Radiation Exposure Statement R&TTE Compliance Statement Safety EU Countries Not Intended for Use Potential restrictive use Chapter 1 Introduction Chapter 2 Hardware Installation Chapter 3 Configuring the Wireless AP Chapter 4 Troubleshooting Chapter 1 Introduction 1.1Package Contents Note: 1.2System Requirements 1.3Features 1.4Specification 1.5Wireless Performance Chapter 2 Hardware Installation 2.1Hardware Connection Chapter 3 Configuring the Wireless AP 3.1Operating Mode 3.1.1Client Mode ParameterDescription 802.11b Mixed Disabled Enabled 3.1.2Access Point Mode Parameter Description 802.11b mode: 802.11g mode: Mixed mode: WEP 3.1.2.1 Advance setting Auto 3.1.2.2 Access Filter 3.1.3Repeater Mode Universal Repeater Parent SSID Channel Default 3.1.4Point-to-PointMode Page 3.1.4.1 Advance Setting 3.1.5Point-to-MultipointMode 3.2Status 3.3Admin 3.4LAN Specify IP Subnet Mask Gateway 3.5WEP 3.6WPA-PSK Chapter 4 Troubleshooting