MAC Address: If required by your ISP, type the MAC address for the WRT-415 WAN interface in this field. You can also copy the MAC address of your PC’s network card to the WRT-415 WAN interface by clicking “Clone MAC address”.

When using PPPoE, enter the following information in the fields (some information are provided by your ISP):

WAN IP: Select whether you want the ISP to provide the IP address automatically, or whether you want to assign a static IP address to the WRT-415 WAN interface. When “Specify IP” is selected, type the PPPoE IP address in the field. Your ISP will provide you with this information.

DNS 1/2/3: Type up to three DNS numbers in the fields. Your ISP will provide you with this DNS information.

User Name: Type your PPPoE user name.

Password: Type your PPPoE password.

Connect on Demand: Enables or disables the connect on demand function, which enables WRT-415 to initiate a connection with your ISP when an Internet request is made to the WRT-415. When enabled, the WRT-415 automatically connects to the Internet when you open your browser.

Idle Time Out: Specify the time that will elapse before the WRT-415 times out of a connection.

MTU: Type the MTU value in the field.

- 8 -