WEP Key: Select the level of encryption you want from the drop-down list. WRT-415 supports 64, and 128-bit encryption.

Key 1 ~ Key 4: There are 4 keys available, please ensure you have enter correct number for the key values with different Key Length and coding (Hex or ASCII) as 64bit (10 Hex digit / 5 ASCII), 128bit (26 Hex digit / 13 ASCII) or 256bit (58 Hex digit / 29 ASCII), please select one of them and enter the key you want to use. Click “Clear” to erase key values.

Note: 128bit WEP encryption will require more system resources than 64bit encryption. Use 64-bit encryption for better performance.

If WPA is selected in the Authentication Type field, the screen appears as below.

Cipher Type: WRT-415 supports two cipher types for WPA encryption: TKIP and AES. The wireless stations must use the same cipher type to build the connection.

RADIUS Server 1: Enter the IP address, communicate port number, and shared secret key of your primary RADIUS server.

RADIUS Server 2: Enter the IP address, communicate port number, and shared secret key of your secondary RADIUS server.

Note: As soon as RADIUS authentication is enabled, all the wireless client stations that are connected to the Router currently will be disconnected. The wireless clients must be configured manually to authenticate themselves with the RADIUS server to be reconnected.

If WPA-PSK is selected, the screen appears as below. Please enter a hard-to-guess passphrase (between 8 and 63 characters) in the field.

- 14 -