When using L2TP, enter the following information in the fields (some information are provided by your ISP):

Dynamic IP / Static IP: Select the IP assignment method.

IP Address: Type the IP address which your ISP provides.

Subnet Mask: Type the Subnet Mask which your ISP provides.

Gateway: Type the IP address of Gateway which your ISP provides.

DNS: Type the IP address of DNS server which your ISP provides.

Server IP/Name: Type the IP address or name of server which offers Internet service. Your ISP will provide you with this information.

L2TP Account: Type your L2TP account.

L2TP Password: Type your L2TP password.

L2TP Retype password: Confirm your L2TP password again.

Maximum Idle Time: Specify the time that will elapse before the WRT-415 times out of a connection.

Auto-reconnect:If this function is enabled, WRT-415 will try to rebuild Internet connection once the link is down.

3.1.3 Password

You can change the Administrator and User’s password in this screen. These passwords are used to gain access to the router interface. When you login with user name “User”, you don’t have permission to configure WRT-415.

- 10 -