MDA200 LED Indicators
MDA200 LED Buttons
LED | LED State | Indication |
|
|
|
| Solid green | Connected to PC audio (default condition) |
|
|
|
| Flashing green | Incoming PC call |
|
|
|
| Flashing yellow | Active PC audio on hold |
|
|
|
| Flashing green | Incoming desk phone call |
|
|
|
| Solid green | Desk phone audio connected |
|
|
|
| Flashing yellow | Active phone audio on hold |
|
|
|
| Both icons | MDA200 is booting up – once complete both LEDs |
| flashing green | will be off if no headset is connected. If a headset is |
| for 2 seconds | connected the PC icon will remain lit solid green. |
|
|
|
| Solid red | Firmware update in process – follow firmware |
|
| update instructions to clear once complete. |
|
|
|
| Solid red | Over current condition – using HL10 without power |
|
| supply. Unplug MDA200, add power adapter, |
|
| MDA200 to PC. |
|
|
|
| Flashing red | Headset fault - replace headset and power cycle the |
|
| MDA200. |
|
|
|
When you press one of the two buttons, you are opening a phone line/audio channel. Depending on the circumstances, you won’t necessarily hear a dial tone until you’ve dialed from your phone. The buttons allow you to switch to a different phone line/channel.
14
