Plantronics T20 Plug in the long phone cord, Place, Your JB-20is ready to use, Desk Mounting

CHAPTER 4 INSTALLATION

Desk Mounting

1.Plug in the long phone cord.

2.Plug the handset cord into the telephone.

Wall Mounting

1.Pull the handset hook out and reverse its position so that the hook points up.

	Fig. 4 - Reversing the hook
	2. Install the Base Plate by
	sliding the small tabs
	into the upper slots. Push
	on the bottom of the Base
Fig.3 - Connections and installation	Plate until it snaps into
	place.

3.Lift the handset and listen for a dial tone.

4. Your JB-20is ready to use.

MANUAL

AUTO

Fig. 5 - Phone base installation for wall mounting

4