Headset Features
Headset Controls | Now that you’ve assembled your headset, installed the software and |
| connected your phones, read this section to learn about the headset |
| features, how to use the controls and more. |
1Volume up/Flash button
Increase the volume Press the volume button up +
Flash between calls During a call, long press the volume button up + for 1.5 seconds
2Volume down/Mute button
Decrease the volume | Press the volume button down – |
Mute/unmute a call | To mute/unmute the headset, press the volume button down – for 1.5 |
| seconds |
3Call button
Place, answer, end a call Press the call control button
4Headset LED Flashes white when in use
5Microphone
CAUTION For your safety, do not use headset at high volumes for extended periods of time. Doing so can cause hearing loss. Always listen at moderate levels. For more information on headsets and hearing visit plantronics.com/healthandsafety.
Headset Power If the headset battery is installed and charged, the headset is automatically on. The headset does not have an on/off button. If you won’t be using the headset for a long period of time and the headset will not be in the charging cradle, place the headset in sleep mode.
Place the Headset in Sleep Mode
Placing the headset in sleep mode with a fully charged battery will provide up to 50 hours of standby time.
1While the headset is idle, press the call button for three seconds until you see the headset flash white twice. .
2To wake the headset, press the call button again until you see two white flashes or hear three high tones.
15
