Plantronics WG101/B manual Fitting Headset, Docking and Charging Headset

2.3 Fitting Headset

The headset comes with a pre-installed earloop and ear tab. An optional headband is also provided.

1To install the headband, gently unsnap the pre-installed earloop from the headset.

2Snap the headband into the headset. The headband can be adjusted to fit.

3For either wearing option rotate the headset until the microphone is pointed toward your mouth.

4The headset can be converted for wearing on the left or right ear with both earloop and headband.

Ear Tab

Headset

Earloop Snap

Headband

5The ear tab has been designed to maximize stability of the headset. It can be rotated on the headset to optimize its fit and comfort in the ear. If desired, the ear tab can be removed by pulling tab from the headset.

2.4 Docking and Charging Headset

1Gently push the headset into the charge cradle.

The indicator light on the headset will be solid red to indicate that the headset battery is charging

2Charge for at least 20 minutes prior to the first use. A full charge takes 3 hours.

Indicator Light

Charging time

20 min .....................

Minimum charge before first use

3 hours ....................

Full charge

Power Indicator Light

Note The USB charging cable can also be used to charge the headset. To successfully charge your headset with the USB cable the PC must be on and in active state (not standby). The charging time will vary according to the number of other devices drawing power from the PC’s USB port(s).

Plantronics Savi User Guide 7