6 Installing the FS3102 system

6.1Installing Disk Drives

Note: Disk drives do not have to be installed in any particular sequence when setting up the FS3102.

Slide the lock release button to the right to release the drive tray handle, (see Figure 6-1). Using the drive tray handle, insert the drive tray into the system with the disk facing up (see Figure 6-2). Push the drive tray all the way in to the system and close the drive tray handle to engage the connector.

Drive Tray Handle

Lock Release Button

Figure 6-1

Figure 6-2 Drive Inserted half way in to System

Note: The drive handle mechanism is the same for both drive and dummy shuttles.

6.2Installing SFPs (Optical transceivers)

The SFPs (Figure 6-3) are fitted to the Fibre Channel controller ports at the factory prior to shipping.

Figure 6-3 – SFP

Raidtec FS3102 Hardware Installation Guide

Version 1.0

16

Page 16
Image 16
Plasmon manual Installing the FS3102 system, Installing Disk Drives, Installing SFPs Optical transceivers