Plasmon FS3102 manual Installing a Host Bus Adaptor HBA, SFP Removal, SFP Replacement

In the event that the SFPs need to be changed, carry out the following procedure’s while referring to Figure 6-4

Controller

SFP

SFP Handle

Figure 6-4

6.2.1SFP Removal

1.Remove the SFP from the controller by lowering the SFP handle to the down position.

2.Gripping the handle, slide the SFP out from the controller fully.

6.2.2SFP Replacement

1.With the SFP handle in the lowered position, align the SFP to the controller port and insert fully until you feel the connector engaging.

2.Turn the handle up until it clicks to the home position (ref: Figure 6-5)

SFP

Figure 6-5

6.3Installing a Host Bus Adaptor (HBA)

Install the prescribed host bus adaptor in the host computer using the documented procedure supplied by the host computer manufacturer.

Raidtec FS3102 Hardware Installation Guide Version 1.0 17