![](/images/new-backgrounds/1142947/14294719x1.webp)
Names of the Parts
Rear
DC input connector
Connect this with the DC plug end of the AC power adapter. (See Page
Personal computer (PC) dedicated USB port (Type B)
Connect this with the USB port (type A) of the PC. (See Page
Use this when reading is started from the PC side and image data is transferred directly to the PC, or when setting the operating environ- ment of the copyboard from the PC side. First, install the drivers and software contained on the supplied
Printer connector (USB port Type A)
Connect this with the USB connector of the printer (See Page
(The printer connector is dedicated for use with a printer; use it only with a printer.)
The connector is located on the bottom sur- face of the main unit. The diagram view is seen from the bottom.
Locking and unlocking the casters of the stand*
Lock the casters with the stopper after setup. To move the unit, remove the stabilizers and release the caster stopper. Press the bottom of the stopper to lock it. Press the top to release it.
Unlock
Lock
Stabilizer Caster