Plus M-11W, M-11S Deleting USB memory image files with the computer, Disconnect the USB memory

Using USB Memory

Deleting USB memory image files with the computer

Before deleting important image files, be sure to save them on the computer (as a data backup).

1.Open “My Computer” and then open the drive icon which shows memory card.

The folder named “M-11” contains the memory storage data of the copy-board.

2. Place the “M-11” folder in the “Recycle Bin”, right click on the icon and select “Empty Recycle Bin” from the pull-down menu.

All of the data contained in “M-11” will be deleted.

Even when the entire folder is deleted, a new M-11 folder

will be created automatically when USB memory is used Drag to the Recycle Bin again with the copyboard.

Disconnect the USB memory

The disconnecting procedure depends on the computer’s oper- ating system. For details, refer to the computer’s operating instructions or help files.

1.Click the [Hardware Removal] icon that is displayed in the task tray.

Click “Stop USB Mass storage Device - drive (E)”. (The E

drive character will differ depending on the personal com- puter system.)

“Remove hardware” icon (example)

2.Click [OK] when “The ‘USB Mass storage Device’ device can now be safely removed from the System” is displayed.

(When using Windows XP, [OK] does not appear on the message screen. Simply disconnect. )

3.This allows the USB memory device to be unplugged from the computer.

Note

•Do not disconnect the USB memory device while the USB memory device’s access indicator is flashing. Doing so will damage the data.

•The USB drive may not be disconnected properly, for exam- ple if the computer is in the process of checking the status of peripherals.

E-27