PLUS Vision U4-111, U4-136, U4-112 user manual Operating, E-24, Switch on the projector power

Power Cable Connections and Switching the Power On/Off

There is an order in which the power cable is connected and the power is switched on/off.

Operating

1 Connect the AC IN connector of the projector and the power outlet using the supplied power cable.

The STANDBY indicator will light in amber, and the unit will enter the standby mode.

STATUS

STANDBY
STATUS	AUTO
SOURCE	QUICK
	MENU

MENU	PC	-CARD
	EO
	-VID
	S
	EO
	VID
	DIO
	AU

Lit amber

STANDBY

Firmly plug in all the way.

To wall outlet

I

DV

2 Switch on the projector power

Main unit operation: Press the STANDBY button.

Remote control operation: Press the STANDBY ON button.

ON STANDBY OFF

	Lit amber		Flashing green		Lit green
		(Approximately 60 seconds)			Power is on
STATUS	STANDBY	STATUS	STANDBY	STATUS	STANDBY

This indicator is also lit green in Eco-mode.

The first time the power is switched on after purchase, [Menu Language Select] will be displayed. See Page E-25 for information about language selection.

•When the power is switched on, the STANDBY indicator changes to flashing green, then lights steadily after about 60 seconds and the projection screen is set to the brightness of normal mode. At this time, if the STATUS indicator is lit in green, [Lamp Mode] is set to “Eco”. See Pages E-31 and E-50 for information about the selection method.

•If the power does not come on, see “When the STATUS Indicator is Lit or Flashing” on Page E-70.

•Your own logo can be projected at the time of startup. See “Startup Logo Creation” on Page E-60.

The projector is now capable of regular projection.

3 Switch on the power of the connected equipment

Note:

•When the power plug will be unplugged from the power outlet, please place the projector near the power outlet so that it may be reached easily.

•Press the STANDBY button or the STANDBY ON button after the STANDBY indicator is lit in amber.

E-24