PLUS Vision U4-136 Resolution / Frequency, Lamp Timer, E-59, Info, This displays the lamp timer

Models: U4-112 U4-111 U4-136

1 80
Download 80 pages 10.13 Kb
Page 60
Image 60
Info.

Info.

Resolution / Frequency

This function displays the resolution and frequency of the detected in- put signal.

Displays when analog RGB or digital RGB signal is projected.

Status

Factory Default

Lamp Timer Reset

Resolution

1024768

Frequency

75Hz 60kHz

 

 

Lamp Timer

12h

Lamp Timer

This displays the lamp timer.

This projector has an Eco mode function. The lamp life will differ between Normal mode and Eco mode.

Lamp Life

Use only in Normal mode: approx.1500 hours

Use only in Eco mode: approx.2000 hours

* Lamp life will differ when there has been switching between the modes.

Status

Factory Default

Lamp Timer Reset

Lamp Timer

12h

When Lamp Life Has Been Reached

“Replace the Lamp Cartridge” is displayed on the screen for 10 seconds in a 1-minute interval.

Please replace the lamp with a new one.

See “Replacing the Lamp Cartridge” on Page E-73 for information about lamp cartridge replacement.

When Over 100 Hours Have Elapsed Since Reaching Lamp Life (Including Eco Mode)

[Warning!! System Shutdown] is displayed for 10 seconds and the power is switched off. Pressing the STANDBY button under this condition will not switch on the power. Please replace the lamp cartridge.

E-59

Page 60
Image 60
PLUS Vision U4-136, U4-111, U4-112 Resolution / Frequency, Lamp Timer, E-59, Info, This displays the lamp timer, Lamp Life