Sharp AY-XPC7JR GB-11, Timer On, To Change Time Setting, Press the TIMER, button, The TIMER ON

Before setting the timer, make sure the clock is properly set with the current time.

TIMER ON

1 Press the TIMER	ON (	) button.
The TIMER ON	indicator will blink;

2 press the TIME ADVANCE or REVERSE button to set the desired time.

(The time can be set in 10-minute increments.)

3 Point the remote control at the receiver window on the unit and press the TIMER SET (SET/C) button.

•The orange TIMER lamp ( ) on the unit will light.

•The unit will generate a beep when it receives the signal.

4 Select the operation condition.

1

2

3

NOTE:

•The unit will turn on prior to the set time to allow the room to reach the desired temperature by the programmed time. (Awaking function)

TO CANCEL TIMER MODE

Press the TIMER CANCEL (SET/C) button.

•The orange TIMER lamp ( ) on the unit will turn off.

•The current clock time will be displayed on the remote control.

CANCEL

NOTE:

•If any TIMER ON, TIMER OFF and ONE-HOUR OFF TIMER are set, the TIMER CANCEL button cancels all settings.

TO CHANGE TIME SETTING

Cancel the TIMER setting first, then set it again.

COMBINED USE OF ON AND OFF TIMERSYou can use the ON and OFF timers in combination.

Example:

To stop operation at 11:00 p.m. and resume operation to bring the room temperature to the desired level by 7:00 a.m.

1 Set the TIMER OFF to 11:00 p.m. during operation.

2 Set the TIMER ON to 7:00 a.m.

The arrow ( or ) between the TIMER ON indicator and the TIMER OFF indicator shows which timer will activate first.

NOTE:

•You cannot programmed the ON-TIMER and OFF-TIMER to operate the unit at different temperatures or other settings.

•Either timer can be programmed to activate prior the other.

ENGLISH

GB-11