PLASMACLUSTER OPERATION
The Plasmacluster Ion generator inside the air conditioner will release positive and negative plasmacluster ions into the room.
Approximately the same numbers of positive and negative ions released into the air will reduce some airborne mold.
1 During operation, press the PLASMACLUSTER button.
• The remote control will display “ | ”. |
•The blue PLASMACLUSTER lamp on the unit will light up.
SELF CLEAN OPERATION
SELF CLEAN operation will reduce the growth mold fungus with Plasmacluster ions, and dry inside of the air conditioner unit. Utilize the operation at seasonal change over terms.
Mold fungus already grown can not be eliminated by this operation.
1 Press the SELF CLEAN button when the unit is not operating.
•The remote control displays “ 
”.
•The blue PLASMACLUSTER lamp on the unit will light up.
•The unit will stop operation after forty minutes.
•The remaining operation time will be indicated on the TEMPERATURE INDICATOR of the indoor unit in minute decrements.
ENGLISH
1
TO CANCEL
Press the PLASMACLUSTER button again.
•The PLASMACLUSTER lamp on the unit will turn off.
NOTE:
•Use of the PLASMACLUSTER operation will be memorized, and it will be activated the next time you turn on the air conditioner.
•To turn off the PLASMACLUSTER lamp, press the DISPLAY button.
•To perform the PLASMACLUSTER operation without accompanying heat, cool or dry mode, press the PLASMACLUSTER button while the unit is not operating. The mode symbol of the remote control will go off and the fan speed can not be set AUTO.
1 |
TO CANCEL
Press the SELF CLEAN button.
Alternatively, turn the unit off by pressing the ON/OFF button.
•The blue PLASMACLUSTER lamp on the unit will turn off.
NOTE:
•You cannot set the temperature, fan speed, air flow direction or timer setting during the SELF CLEAN operation.
