Sharp AY-XPC12JR, AY-XPC9JR Tips About Indicator Panel, GB-12, Notes, Single use, Multi use

3

2

3 Take off the air purifying filters from the air filters.

4 Clean the filters.

Use a vacuum cleaner to remove dust. If the filters are dirty, wash them with warm water and a mild detergent. Dry filters in the shade before reinstalling.

5 Reinstall the air purifying filters.

6 Reinstall the filters.

1 Reinstall the filters in the original positions.

2 Close the open panel.

3 Push the arrow-marked of the panel firmly to lock it in place.

3

2 1

CLEANING THE UNIT AND THE REMOTE CONTROL

• Wipe them with a soft cloth.

• Do not directly splash or pour water on them. It can cause electrical shock or equipment damage.

• Do not use hot water, thinner, abrasive powders or strong solvents.

MAINTENANCE

Be sure to disconnect the power cord from the wall outlet or turn off the circuit breaker before performing any maintenance.

CLEANING THE FILTERS

The air filters should be cleaned every two weeks.

1 Turn off the unit.

2 Remove the filters.

1 Lift the open panel.

2 Push the air filters up slightly to unlock them.

3 Pull the air filters down to remove them.

1

TIPS ABOUT INDICATOR PANEL

The indicator panel will change each time you press the DISPLAY button in the fol- lowing manner.

The room temperature is displayed.

The outdoor temperature is displayed.

No display.

NOTES:

•The displayed temperatures are rough estimates and may vary from the actual temperatures.

•Temperature display ranges

Room temperature: 0°C ~ 40°C ( is displayed when less than 0°C and when higher than 40° C)

Outdoor temperature: –9°C ~ 45°C ( is

displayed when less than –9°C and when higher than 45°C)

• is displayed during the first about 0~120 seconds of operation while the temperatures are being detected.

•During SELF CLEAN operation, the indicator panel will display remaining time of the operation. Room and outdoor temperature will not be displayed even if you press the DISPLAY button.

Single use

•Only the room temperature can be displayed for 5 seconds when the unit is not in operation.

Multi use

• is displayed for 5 seconds when the unit is not in operation.

GB-12