PLUS Vision U4-136 Input Format, E-50, Setup, Lamp Mode, STATUS Indicator, Video and SVideo

Setup

Lamp Mode

Use this if the picture is projected on a small screen and the picture is too bright or when projecting images in dark rooms.

Select the item name “Lamp Mode” and select the setting contents with the SELECT ￿￿ buttons.

Eco	The lamp brightness is set to 80% and the lamp life is extended.
	(STATUS indicator is green)
Normal	The lamp brightness is set to 100% and the screen is bright.
	(STATUS indicator is off)

Note:

Frequent switching this mode can degrade the lamp.

Input Format

Auto Source	On
Auto Power Off	Off
Memu Position
Lamp Mode	Normal
Input Format
Presentation Timer	Off
Logo Capture
PC Card Viewer
Option
STATUS	STANDBY

STATUS Indicator

This function is used in setting the input signals of the input connec- tors.

Normally, this should be set to Auto. When identification is not possible with Auto, make the setting.

Select the item name “Input Format”, press the ENTER button, and the sub menu will open.

Select the connector that is to be changed, and select the setting contents with the SELECT ￿￿ buttons.

[PC]

This is the signal setting for the DVI connector.

Auto	Automatically identifies the signal.
RGB	Analog RGB signal is set.
Digital	Digital RGB signal is set.

Component . Component signal is set.

(YPbPr and YCbCr signals are identified automatically.)

[Video] and [SVideo]

[Video] is the color system setting for the VIDEO connector and [SVideo] is the color system setting for the S-VIDEO connector.

Auto	Automatic identification.
NTSC	Fixed to the NTSC system.
PAL	Fixed to the PAL system.
SECAM	Fixed to the SECAM system.

Auto Source		On
Auto Power Off		Off
Memu Position
Lamp Mode		Normal
Input Format	PC		Auto
Presentation	Video	Off
			Auto
Logo Capture	SVideo		Auto
PC Card Viewer
Option

E-50