Power Cable Connections and Switching the Power On/Off
There is an order in which the power cable is connected and the power is switched on/off.
Operating
1 Connect the AC IN connector of the projector and the power outlet using the supplied power cable.
The STANDBY indicator will light in amber, and the unit will enter the standby mode.
Y |
|
STANDB |
|
STATUS | AUTO |
SOURCE | QUICKENU |
| M |
| MENU |
Lit amber
STATUSSTANDBY
Firmly plug in all the way.
To wall outlet
VIDEO
AUDIO
DVI
MOUSE
2 Switch on the projector power
Main unit operation: Press the STANDBY button.
Remote control operation: Press the STANDBY button.
|
| Lit amber |
| Blinking green |
| Lit green |
|
|
| (Approximately 60 seconds) | Power is on | ||
STANDBY | MENU |
|
|
|
|
|
| STATUS | STANDBY | STATUS | STANDBY | STATUS | STANDBY |
RGBENTER
VIDEO CANCEL | QUICK |
Q
FREEZE MUTE ECO AUTO
1 2 3 4
ASPECT
This indicator is also lit green in
The first time the power is switched on after purchase, [Menu Language Select] will be displayed. See Page
•When the power is switched on, the STANDBY indicator changes to blinking green, then lights steadily after about 60 seconds and the projection screen is set to the brightness of normal mode. At this time, if the STATUS indicator is lit in green, [Lamp Mode] is set to “Eco”. See Pages
•If the power does not come on, see “When the STATUS Indicator is Lit or Blinking” on Page
If the “Password” input window is displayed: See Page E-33.
A password is set for this projector.
The projector cannot be used unless the correct password is input.
To turn off the power: See Page
The projector is now capable of regular projection.
3 Switch on the power of the connected equipment
Note:
•When the power plug will be unplugged from the power outlet, please place the projector near the power outlet so that it may be reached easily.
•Press the STANDBY button after the STANDBY indicator is lit in amber.•The included power cable is exclusively for use with the
