General Operation
Selection of Aspect Ratio
This function selects horizontal and vertical picture proportions of the input signal.
Press the ASPECT button while viewing the projected image and select the aspect ratio.
Personal Computer Signal
Each press of the ASPECT button advances the selection one step in the se- quence of Auto → Direct → Real, and then repeats.
Auto | Automatically enlarges or reduces the image to project a full screen in a ratio |
| of 4:3 |
Direct | Maintains the aspect ratio and projects a picture of the maximum displayable |
| size |
Real | Projects the input signal without pixel conversion. |
STANDBY | MENU |
RGB | ENTER |
VIDEO CANCEL | QUICK |
Q
FREEZE MUTE ECO AUTO
1 2 3 4
ASPECT
VOL KSTN ZOOM TIMER
Input Signal | Auto | Direct | Real |
The setting is higher than the display reso- lution of the projector.
The setting is lower than the display reso- lution of the projector.
Video Signals / Component Signals
Each press of the ASPECT button advances the selection one step in the sequence of Auto → Wide → Zoom, and then repeats.
Auto | While maintaining the aspect ratio, projects a full screen so that no portions extend beyond the boundaries of the screen. The top | ||||||||
| and bottom of the 16:9 image becomes black. |
|
|
|
|
| |||
Wide | Projects to fill the full width with the entire image at 16:9. |
|
|
|
|
| |||
| (This feature is used to project a squeezed image in a proper aspect ratio.) |
|
|
| |||||
Zoom | Projects only the 4:3 portion within 16:9 image to fill the screen. |
|
|
| |||||
| (Portion that extend off screen is cut.) |
|
|
|
|
| |||
| Aspect ratio selection | Auto | Wide | Zoom | |||||
| 4:3 screen |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
16:9 screen
Note:
The “Real” setting under “Aspect” for digital RGB signals can only be adjusted when the input signal is of XGA size or smaller.
Note:
When selection has been made for the “Real” setting of the personal computer signal (i.e., when the input signal and the projector display resolution are high) and the “Zoom” setting of the video signal, pressing the SELECT () buttons on the remote control will permit movement of the display position. Note that there will not be any movement when the menu or the quick menu is displayed.
