Setup
•Select menu name “Setup”.
See “Menu Operation Method” on Page
Auto Source
The Auto Source function automatically detects the input signal when the power supply is switched on and when the input is switched.
Select the item name “Auto Source” and select the setting contents with the
SELECT () buttons.
On | Switches on the automatic detection function |
Off | Switches off the automatic detection function |
Signal Detection Order When On
The sequence of Analog RGB → Component → Digital RGB → VIDEO →
When a signal is detected, the search is stopped and the image is projected.
Auto Power Off
This function switches off the projector power automatically when the input of the projector enters a
Select item name “Auto Power Off” and select the setting contents with the
SELECT () buttons.
On | The power is switched off when there is no signal. |
Off | The power is not switch off even when there is no signal. |
Operation when Function is On
•The “No Signal Power Off” display appears when a
•If a signal is input during the appearance of the display and an operation button other than the STANDBY button is pressed, the display is closed and the function is cancelled.
Note:
Some video decks and other equipment output a blue background or other video when playback ends. When this happens, a signal is being input to the projector and Auto Power Off is not activated.
Menu Position
This function sets the display position of the menu.
Select item name “Menu Position” and select the setting contents with the
SELECT () buttons.
............. Displays on the left side
............. Displays on the right side
