Names of the Remote Control Parts/Preparing the Remote Control
There are two types of remote control units included with the U5 series of projectors. Both types are described below. Refer to the description (and diagram) for the remote control unit included with your projector.
Names of Parts/Preparing the Remote Control Unit
Included with the
Applicable Projector:
Infrared transmitter
Laser transmitter |
STANDBY button
Buttons used for input selection
RGB button and VIDEO button (VIDEO /
Buttons used for menu operations
The , , and buttons are the select (, , and ) buttons.
FREEZE button
VOL button
STANDBYLASER
RGB VIDEO AUTO
MENUQUICK
Q |
ENTERCANCEL
FREEZE MUTE TIMER
1 | 2 |
VOL ZOOM
3 | 4 |
LASER button
(Turns the laser point on and off)
AUTO button
(Automatic adjustment of the RGB moving image)
QUICK button
Buttons used for the PC mouse function
(JOG button and
TIMER button
MUTE button
(Temporarily cancels the video and audio)
ZOOM button
Number buttons
Inserting the Batteries
When using the remote control for the first time, install the batteries that were supplied.
1 Slide the battery compartment cover (located on the bottom of the remote control) and pull off.
2 Insert the batteries to match the "+" and
3 (A) Leaving a little space in the front, close the lid, (B) then with the back pressed tightly,
(C) press the lid towards the front.
(A)(C)
(B)
* When replacing batteries, purchase two of the same type of AAA battery.