• Setting Power Save
The Power Save function allows you to set an idle time after which the camera automatically sets to sleep mode to save power. After a minute of being in the sleep mode, the camera eventually turns off power.
Available settings are: 1, 3, or 5 min.
This function is not available as follows:
•Recording a movie or audio file
•Playing a slideshow/movie/audio file
•Using the USB connector.
•Setting LCD Save
Enable the LCD Save function to automatically decrease the LCD brightness to conserve battery power. When the camera is idle for 20 seconds, the LCD darkens. Press any button to resume to normal brightness.
•The camera is idle when no buttons are pressed. LCD Save, though enabled, does not function during movie playback, slideshow, and video recording.
•Setting Date & Time
Use the Date & Time function to set the date and time of your camera. This function is useful attaching date stamps on captured images. Your camera uses a
1.Press the navigation controls to adjust date and time value. By holding down the 
or 
keys, the numeric values change continuously.
2.Press OK to apply changes.
Polaroid i1437 Digital Camera User Guide | 73 |
www.polaroid.com |
|
