BALANCE

1 Move to “BALANCE” by pressing CH (…/†) buttons.
2 Press VOL (œ/√) buttons to adjust audio output between
left and right speakers.

SPATIAL

This function is to work virtual surround sound effect.
1 Move to “SPATIAL” by pressing CH (…/†) buttons.
2 Press VOL (œ/√) buttons to select.

SOUND SOURCE

Select sound output between Main Picture Sound and PIP
Picture sound.
* This item is available while PIP picture exists. (Refer to page
26 for PIP mode)
1 Move to “SOUND SOURCE” by pressing CH (…/†) buttons.
2 Press VOL (œ/√) buttons to select.

PRESET

This function is to select the sound appropriate to your TV
program.
1 Move to “PRESET” by pressing CH (…/†) buttons.
2 Press VOL (œ/√) buttons to select among USER, NEWS,
MOVIE and MUSIC.
MENU adjustment
21
MENU adjustment
20
3
SOUND ADJUSTMENT
Press MENU ( ) button to display the MENU screen.
Select “SOUND” by pressing VOL (œ/√) buttons, then press CH
down (†) button to enter into the items below.

MTS

The System has a feature that allows a sound reception
different from the main audio for programs. This feature is
called Multi-channel Television Sound (MTS). The System with
MTS can receive mono sound, stereo sound and Secondary
Audio Programs (SAP). The SAP feature allows a TV station to
broadcast other information, which could be audio in another
language or something completely different like weather
information. You can enjoy hi-fi stereo sound or SAP
broadcasts in the available location. If stereo sound is difficult
to hear, select MONO.
1 Move to “MTS” by pressing CH (…/†) buttons.
2 Press VOL (œ/√) buttons to select among STEREO, SAP or
MONO.
• STEREO broadcasts : Watch programs like live sports, shows
and concerts in dynamic stereo sound.
• SAP broadcasts : Listen to the second language,
supplementary commentary and other information. (SAP is
mono sound.)
• MONO : Obtain clearer sound by switching the mode into
fixed mono-sound manually.
* You can select one directly with MTS button on the remote
controller.

TREBLE

To stress high frequency sound
1 Move to “TREBLE” by pressing CH (…/†) buttons.
2 Press VOL (œ/√) buttons to adjust the treble weaker or
stronger.

BASS

1 Move to “BASS” by pressing CH (…/†) buttons.
2 Press VOL (œ/√) buttons to adjust the bass weaker or
stronger.
!!
•MTS item can be activated only when
TV mode is selected.
•When “MONO” mode is selected, the
sound remains mono even if the TV set
receives a stereo broadcast. You must
switch the mode to “STEREO” if you
want to hear stereo sound.
•If you get some strange sound on
stereo mode in poor signal area or non-
dual signal service area, make sure to
select MONO mode.
←For weaker treble For stronger treble
←
←For weaker bass For stronger bass
←
←Decrease right speaker
sound Decrease left speaker
sound
←
!!
•Bilingual (dual language) signal
- This contains the secondary language
signal in addition to the primary one.
- There are the primary and secondary
languages and stereo modes in
bilingual signal.
•STEREO or SAP mode is available only
when broadcasting signal contains the
data.
polaroid LCD1550/1750(NT) 03.6.19 9:58 AM ˘ ` 20 mac001 1200DPI 90LPI